SouthCoast is the Galveston, TX HVAC company that makes sure you receive the most from your air conditioning or heating service. From financing options to special offers to our team’s expertise, we are sure to pack as many customer benefits as we can into our company. Plus with us, you’re not just another AC or heating customer; you’re a meaningful relationship.
Get any HVAC service from us at a great price with phenomenal customer service:
We’re also a top choice for our HVAC products at a discount, which include furnaces, air conditioners, comfort controls, heat pumps, indoor air quality systems and much more. Although you’ll get a great deal, we don’t skimp on quality, offering products from leading brands such as American Standard, Coleman, Goodman and Lennox.
Read our Galveston, TX air conditioning and heating reviews to see the ways in which we make a repair, replacement or tuneup more than just a service and satisfy specific comfort goals.
Yes, SouthCoast Heat & Air is an essential service provider during the COVID-19 virus outbreak. This is because SouthCoast Heat & Air provides vital home heating and cooling services that are essential for maintaining the safety, sanitation, and operation of residences and businesses near Galveston TX. HVAC contractors like SouthCoast Heat & Air have unique skills that are important to public health and welfare.
An air purifier is an IAQ device that helps remove impurities from the air that you breathe and cleans the air in your home. It can help people with breathing diseases like asthma and allergies to improve indoor air quality.
An air scrubber is a device that helps eliminate indoor air quality risks by reducing things that dirty the air in your home. These could be things like dust, dander, pollen, chemicals, cigarette smoke, mold, pet orders and things that you cook in your home.
If you want an indoor air quality device that can clean the air and surfaces in your home, an air scrubber is the right choice.
Call SouthCoast Heat & Air at (346) 326-2665 or contact us online to schedule an appointment online.
Average Repair Costs for AC Units and Cooling Systems
You can expect to pay anywhere from $50-$750 for an AC repair near Galveston, TX. The average price is around $250.
Factors that go into this price are:
To ensure you get a reasonable cost for your heating or air conditioning, contact your local air conditioning contractor online, SouthCoast Heat & Air or call (346) 326-2665 to schedule your appointment.
Alex did a great job. He came when 5 others did not come or did not answer their phone. I have put you all's number in my phone so if I need you, or want to recommend you, I can. What you may, or may not know, is that Alex has grasped the importance of customer service. He did this by listening, by working quickly, creating a fair estimate, then sticking to it. Lastly, he did a great job and called me to keep me in the loop. For me, Alex is the face and the persona of your company. In my opinion, Alex seems to be a very marketable employee. If there is ever a time when you think he may be looking for other employment, you should think hard before just letting him go. Thanks, George Bentinck
Matthew was extremely professional. He explained what the issue was and repaired it. Matthew is a valuable asset to your company.
One team that meets all these qualifications, values and ethics. So happy to have found this small family run business that treats its customers like family.
We are SO SO SORRY about the dog fight! Ruby wouldn't let go of Riley's nose. He is the one who had her ear but he let go! We had blood everywhere. Jim said he is so sorry for being rude. We were just in a mini-crisis. The dogs are just now getting to be okay with each other. WE APOLOGIZE. We think everything is okay but if you need to check more we can reschedule.
Matthew listened to our concerns with the AC. He explained to us what he found and told us our options and then hopefully fixed our problem. Very pleased with his service!
Another great experience!
Joe is very thorough and diligent. Has earned our trust!
Delighted.
We were not able to be at our house while the new AC was installed. Joseph did a great job communicating and sending pictures of the installation. He went above and beyond and returned the next day to make sure everything was working properly.
Quick response and appreciated the detailed updates and very friendly and knowledgeable staff.
It took 5hours, but is pleased with the outcome
When I have a question and need an answer, they help. When I need to understand why my HVAC is not working properly, they make sure they find the right answer. Same day service with notifications of arrival time. Issues resolved.
Charles was great to work with. Diagnosed the issue quickly and got things moving forward. Hope to work with him again.
Charles came out mid week to address the dripping in two places of our AC unit. He was diligent to consider everything and spent needed time to determine the cause. Initially it appeared finished but one of the drip sites continued. He came back on a Saturday morning and did a couple of more things and it is working perfect. So thorough and so courteous. Very good diagnostic skills.
Warranty: gas valve on furnace stuck in the closed position, not flowing any gas to burners. Replaced gas valve and heater is operating normally at this time.
Maintenance: heater is operating normally at this time. Emergency drain pan is extremely rusted. Evaporator coil is caked with dirt and dust.. recommend replacing drain pan and cleaning evaporator coil to bring system back up to standard. Drain pan has been replaced and coil has been cleaned we will charge the remaining balance on 2/07/2021
Tune up: performed heating tune up on furnace and checked outdoor unit. Heat is operating normally achieving 42 degree temperature rise. Outdoor capacitor and fan rotation are good. Amp draws are in range.
Clean coil, Furnace blower wheel, motor & cabinet removing & breaking down all organic & inorganic materials. Sealing unit after it is pulled apart, pull vacuum, replacing filter drier and releasing refrigerant when complete & test unit for performance.
repair: furnace draft motor has rusted the blades off. Recommend replacing draft motor assembly. Replaced draft motor assembly and system is achieving a 37 degree temperature rise.
Repair: hot surface igniter on furnace was not heating, causing gas not to ignite. Recommend replacing hot surface igniter to ingite gas and provide flame. Igniter has been replaced and system is heating normally at this time.
Ac repair: control board on furnace not sending signal to gas valve to allow gas to flow and burn. Recommend replacing control board to allow gas valve to open and let the gas through the burners. Replaced control board and furnace is heating normally.
Installed blower motor and deiced coil. Recommended adding float switch & clearing drain lines to prevent water damage since drain pan was full of water and lines were partially clogged.
Ac repair: 5 ducts to AC are either crushed or removed from registers. Recommend replacing duct runs entirely with new ducts. Attic Decking will be needed in order to safely traverse the attic space.
Replaced contactor, capacitor & Torque booster addition.
Maintenance: performed heating season maintenance. System is operating normally at this time, amp draws are in range, achieving a 33 degree temperature rise. Emergency drain pan is rusted throughout in several areas. Recommend replacing emergency drain pan to prevent further water damage to ceiling.
Maintenance: furnace is new and in great condition and producing a 35 degree heat rise. ECM blower has good amp draw on both 1st and 2nd stage. System has air scrubber and media cabinet for improved air quality. Changed filter and blew out drains while on site. Customer notice that the tstat would switch the fan from auto to on by itself after running a cycle. Recently started happening when it got cooler. Will have to get in contact with support to see if there is some setting options that could be changed to solve issue.
Maintenance: both furnaces are functioning properly. Front system has a 43 degree split and the unit in the back has a 51. Both are in range according to the data plate. Heat exchangers were clear and showed no signs of issue. Blowers were amp range as well. Noticed a return duct was not connected to unit and just hanging there with the correct collar size sitting on top of the unit. Got to approval to attach duct and did so.
Maintenance: both units are functioning properly with a 38 downstairs and 34 for up. Up stairs unit is older and customer would like quote for for the future. Duct work was in good condition. Cleared drain lines. Both heat exchangers and blower housing for units were cleaned as well. safeties for both units were functioning properly as well.
Callback: thermostat was wired to rc instead of r. Rc is for cooling witch would not all tstat to call for heat. Moved wire to the correct terminal and unit is not achieving a 25 degree rise.
Installed 95,000 Btu Daikin furnace 12 Year parts/ 1 Year labor, heater feet, gas flex hose, flue pipe correction & sealed return/supply.
Diagnostic: appt 59 welded blower motor braket is broke off and the capacitor is out of range. Need, OEM new blower wheel. Recommend replacing unit is 18 years old. Appt 177 blower motor is also out and ceased up. Also requires OEM, capacitor and recommended a new blower wheel as well or a cleaning. System is also 18 years old and would recommend replacing. Need to get in contact with the appt owner to take payment for diagnostic or repairs was told that they would not be available untill monday. Also need to get incontact with goodman for the motors.
Ac repair: appt 59 back to install new motor blower wheel and capacitor. Unit is now up and running at this time
Ac repair: appt 177 replacing blower motor and capacitor. Unit is up and running at this time.
Maintenance: furnace is producing at 44 degree heat rise. Safeties are functioning properly and shutting off the system when needed. Blower motor is clean and pulling correct amps. Capacitor is just out of range and recommend replacing it. Heat exchanger and burners are very rusted and could potentially produce a crack in the exchanger could not see all the way in heat exchanger to verify but, highly recommend lookin into replacement options.
Ac repair: Control board on the lobby unit was shorted on low voltage terminals. Not running cool. The shop ac unit was completely out of refrigerant. Recommend replacing the control board for the lobby unit. Recommend recharging the shop unit with refrigerant and performing a leak search to find the leak. Control Board has been replaced and system is operating normally at this time. The shop unit has been recharged and is cooling in range. Leak was found at the outdoor coil. Recommend upgrading the system to R410A.
Maintenance: performed cooling and heating maintenance. System is achieving a 19.5 degree temperature split in cooling, and 16 degree temperature rise in heating. Drain lines are clear and draining normally at this time.
Ac repair: insulation had gotten wet do to water dripping down from the the roof. Re insulted and rapped duct that had gotten wet.
Ac repair: suction line was leaking on the the ceiling. Water was dripping g at the lowest point of the line set were it dips down witch would cause condensation to run down that direction. Replaced the section of insulation that was wet and hung up the line set to eliminate the dip. Will monitor area were there was water to insure the issue dose not continue. Customer also would like a quote on duct replacement.
Ac repair: unit had a restriction across filter drier that was cause the unit to trip on thermal lock out. Replaced filter drier, pressure tested for leaks and pulled a vacuum. Recharged system and is now operating with a 15 split and is in range. Job took some time due to the difficulty of accessing the filter drier and having to make copper modifications.
Contact Info
You can always count on the SouthCoast Heat & Air to get to you fast and get the job done right the first time. We use state-of-the-art diagnostic equipment to find the source of your heating and air conditioning problems and fix them fast.
License # TACLB93513E
Homes and businesses in the Galveston Bay and Houston Metro areas.
Our Office Location:
Santa Fe, TX
© SouthCoast 2018 • Santa Fe, TX • Tel: (346) 326-2665 • Site maintenance by LeadsNearby
Powered by Nearby Now